Closing, and the tricky cases
After the return in KeyRent, the team does the verification in Check: what the customer reported, the fees, securing the vehicle. Out of zone, no network or no battery: each case has its answer.
Objective
By the end of this lesson, you will know how to close a Keyless rental and handle situations outside the usual journey.
The essentials
Closing. A Keyless rental ends in two steps: the customer ends it in KeyRent, then the team checks it in Fleetee Check. Karim opens Today’s Verification block (or the Planning’s To check card) and taps Do the check:
- Information: what the customer reported, new damage, fuel, AdBlue or mileage differences, or that none was reported. He corrects it if needed;
- the review of photos and readings, and the return fees calculated with your Manager settings;
- Securing the vehicle: keys in the glove box, Lock the vehicle;
- Finish: the vehicle goes back into the cycle, and the customer receives the closing e-mail with the inspection.
Two agents cannot check the same return at the same time.
The tricky cases.
- Returned out of zone: KeyRent refuses to end the rental and shows the zones on a map. Ask the customer to move the vehicle.
- No network or no battery: KeyRent can no longer send commands. From the agency, lock or unlock remotely, in Manager (Digital key panel) or in Check (“Access key”).
- Fuel or mileage: the Information screen flags differences; check the fees before finishing.
Key steps
Open the verification
Check › Today › Verification › “Do the check”.
Read what the customer reported
Correct it if needed.
Check the fees, secure
Return fees, keys, locking.
Finish
The vehicle is back in circulation.
Your turn
Prepare your standard answer
Write the message your team will send to a customer stuck out of zone: where your zones are, whom to call. Keep it at hand for the first real case.
Further reading
Check what you learned
Answer every question correctly to complete the lesson.
Progress kept on this device. Soon with your Fleetee Account.