Preparing a vehicle
Preparation is the inspection you do on your own, before the rental: information, vehicle tour, existing damage. It is the cycle’s reference, carried over by the departure.
Objective
By the end of this lesson, you will know how to prepare a vehicle and why this step makes pick-ups faster.
The essentials
A vehicle’s cycle has three steps: Preparation → Departure → Return (then Verification for a keyless vehicle). Preparation is done without the customer, when the vehicle is ready to go out again.
It does three things:
- it is the cycle’s reference: the departure carries over the latest preparation; you do not redo what has not changed;
- it puts the vehicle back into the cycle: after a return, it is “To prepare”; once prepared, “Prepared”;
- it sets the vehicle tour: without a tour, the return has no photo to compare with.
Karim opens the vehicle in the Fleet tab and taps Prepare, or goes through Today’s Preparations to do block. Two cards: Vehicle information (mileage, fuel…) and Vehicle condition (photos and damage). He circles every existing damage with his finger, then taps Validate preparation. No signature.
After 30 days, Check warns you: prepare the vehicle again before the next departure.
Key steps
Open the preparation
Fleet › the vehicle › “Prepare”, or Today › Preparations to do.
Update the information
Mileage, fuel, required properties.
Take the tour and record damage
Every side, then every existing damage circled.
Validate
“Validate preparation”.
Your turn
Prepare a vehicle that is back
Pick a “To prepare” vehicle in the Preparations to do block and do its full preparation, vehicle tour included. It is real work: do it on a vehicle that is actually back.
Further reading
Check what you learned
Answer every question correctly to complete the lesson.
Progress kept on this device. Soon with your Fleetee Account.