The return and damage
On return, everything is compared with the signed departure: readings next to the departure values, every side checked next to its photo, new damage circled, return fees reviewed.
Objective
By the end of this lesson, you will know how to do an accurate return inspection, against the departure, and record new damage.
The essentials
On return, everything is compared with the departure the customer signed. A damage not in the departure is a new damage.
Karim taps the card marked Return (or Late), then Start return:
- Information: departure values show next to mileage and fuel;
- Condition: for each side, the departure photo shows as the reference; he frames it the same way, then Nothing to report or Report. A photo taken but not checked does not count;
- Other damage: Add › Add a damage, photo, circle, part, type. Several damages can be circled on the same photo;
- Summary: compared properties, new damage and return fees (fuel, cleaning…), which are not calculated offline;
- Signatures, then Finish.
Damage or extra photo? A damage is located and follows the vehicle until repaired. An extra photo is free, with no location, and never carries over to the next rental. A repaired damage is removed from the vehicle page, Damage section, “Do not offer”.
Once an inspection’s PDF is generated, it is sealed: no more signatures, no new generation. It is the reference in case of dispute.
Key steps
Open the return
Card marked Return › “Start return”.
Compare the readings
Mileage and fuel against the departure.
Check every side
“Nothing to report” or “Report”.
Review the fees, collect signatures
Summary, signatures, “Finish”.
Your turn
Find an inspection
In Manager, open Fleet › Inspection reports and open a recent return: compare its photos with the departure’s. You change nothing.
Further reading
Check what you learned
Answer every question correctly to complete the lesson.
Progress kept on this device. Soon with your Fleetee Account.