Skip to content
Fleetee logoFleetee logo

How do I do the pick-up inspection with Fleetee Check?

  • Check v3
  • Administrator
  • Agency manager
  • Rental agent

In short. Tap the rental in Today or Planning, check the customer, payment, deposit, extras and drivers, then “Start departure”. Record the information (mileage, fuel…), take the vehicle tour and note damage, review the summary, then collect the signatures and tap “Finish”.

The departure inspection is done with the customer, when they take the vehicle. It starts from the latest preparation: you confirm what hasn’t changed and complete the rest.

  1. Open the rental

    In Today (Today’s actions) or in Planning, tap the rental card marked Departure. You can also go through the vehicle page, Departure tile.

  2. Check the “The inspection is about to begin” screen

    It brings together the customer and the vehicle (tap the vehicle to change it), payment and deposit, extras and drivers, and the customer’s online check-in, whose documents you can accept or refuse. A reminder above the button flags an incomplete payment or deposit (“Payment incomplete”, “Deposit incomplete”): it does not stop you from going on.

  3. Tap “Start departure”

    If the vehicle hasn’t been prepared, or its preparation is no longer recent, the app says so and offers Prepare the vehicle: you do the preparation, then come back to the departure. Otherwise, tap Start the inspection.

  4. Info: record the information

    Mileage, fuel and the other properties your company asks for. Values from the latest preparation are carried over: correct what has changed. Required fields are marked with *.

  5. Condition: vehicle tour and damage

    Tap Start vehicle tour and photograph each side. Known damage is offered. For new damage: Add › Add a damage, take the photo, circle the damage with your finger, then choose the affected part and the type. For a free photo with no location: Add an extra photo.

  6. Resume: review

    You review the information, damage and photos before moving on to the signature.

  7. Signatures, then “Finish”

    One card per signature your company asks for (renter, lessor, contract). The customer ticks the statement, signs in the box, then Confirm. The signing location fills in by itself (type it when offline). The contract opens with View the contract. Tap Finish: the inspection is sent.

Good to know

  • Required vehicle tour: if your company requires it, “Next” stays blocked until every side is photographed.
  • A colleague is already on it: the app shows their name and how long before you can try again.
  • The departure is already done, or the rental already has its return: the app tells you.
  • While sending, don’t leave the app. With no network, the inspection is queued and goes out on its own when the signal is back (Does Fleetee Check work without a network?).
  • What the customer receives and signs is set in Profile › Administration › Fleetee Check settings (administrator) or in Manager (How do I set up Fleetee Check from Manager?).

Where to find it: Today or Planning › the rental › “Start departure”

Where to find it: Today or Planning › the rental › “Start departure”

Was this article helpful?

Write to support

Ask the assistant: “…”coming soon