Skip to content
Fleetee logoFleetee logo

How do I do the return inspection and record damage?

  • Check v3
  • Administrator
  • Agency manager
  • Rental agent

In short. Tap the rental marked Return, then “Start return”. Record mileage and fuel (departure values show for comparison), check each side of the vehicle next to the departure photo (“Nothing to report” or “Report”), review the return fees, then have the customer sign.

On return, everything is compared with the departure the customer signed. Damage that wasn’t there at departure is new damage.

  1. Open the rental

    In Today or Planning, tap the card marked Return (or Overdue), then Start return.

  2. Info: record mileage and fuel

    The values recorded at departure show next to each field for comparison.

  3. Condition: check each side

    For each side of the tour, the departure photo shows as a reference: match the framing. Tap Nothing to report if the side is unchanged, or Report to photograph and circle the difference. A photo taken but not checked doesn’t count: each side must be explicitly checked.

  4. Add any other damage

    Add › Add a damage: take the photo, circle the damage with your finger (press its centre and drag to enlarge the circle, or use Circle size), then choose the affected part, the type and, if needed, a comment. Several damages can be circled on the same photo; they are numbered.

  5. Resume: review and check the fees

    The summary shows the properties compared with the departure, the new damage and the calculated Return fees (fuel, cleaning…). They can’t be calculated offline.

  6. Have it signed, then “Finish”

    As at departure: one card per signature required, the signing location, then Finish.

Damage or extra photo?

  • A damage is located on the vehicle. It stays with the vehicle until it is repaired: it is offered at every following inspection.
  • An extra photo is a free photo with no location. It only counts for the current cycle and never passes on to the next rental. Without a circle, it reads “Photo with no damage”.
  • A damage photo confirmed with no circle: the app asks for the Type of damage for the whole photo.

The app tells you how many damages are still To qualify and takes you to the one to complete.

Good to know

  • No departure was done in Fleetee Check: the app warns you and still lets you do the return.
  • Required vehicle tour: on return, “Nothing to report” remains possible if the tour was taken at departure.
  • A side that wasn’t photographed at departure is taken as a normal photo, with no difference to justify.
  • A repaired damage is removed from the following inspections from the vehicle page, Damages section: Do not offer (What is in a vehicle file in Fleetee Check?).
  • Fees are set in Manager: How do I add return fees (fuel, cleaning…)?.

Where to find it: Today or Planning › the rental › “Start return”

Where to find it: Today or Planning › the rental › “Start return”

Was this article helpful?

Write to support

Ask the assistant: “…”coming soon